Gyeon Gyeon Q² CanCoat Non-Aerosol Essentials Protection Kit

The Gyeon Q² CanCoat EVO Essentials Protection Kit is a complete kit that provides you with the right products to perfectly apply the Q² CanCoat EVO after you have cleaned or polished the paintwork.

With Q²M Prep, you remove polishing oils and grease to ensure the coating adheres optimally. Use it with the included Monello Senza Bordi microfiber towels to make sure no residue remains that could affect the coating’s adhesion.

Then apply Q² CanCoat EVO using the included white cloth from the product packaging. Work panel by panel and wipe off immediately with the Monello Senza Bordi towels. Use one towel for wiping off and a second one to buff the panel again. Keep the paintwork dry for at least 4 hours. The longer the treated paintwork stays dry, the better.

Product number:	BGYE08

This kit consists of:

Q² CanCoat EVO 200 ml kit including microfiber cloth
Q²M Prep (500ml)
Monello Senza Bordi (4 pieces)

H226: Flammable liquid and vapour.

H318: Causes serious eye damage.

H373: May cause damage to organs through prolonged or repeated exposure .

H412: Harmful to aquatic life with long lasting effects.

Wash the car with a strong shampoo. Then clean and/or polish the paintwork. Afterward, degrease with Q²M Prep. Apply Q² CanCoat EVO panel by panel, wiping off immediately to a high gloss. Buff the panel again with a clean cloth to ensure you haven't missed any spots.

Q² CanCoat EVO is fully cured after 24 hours. Optional: treat the car with Q²M Cure before taking it outside. Avoid using strong cleaners during the first week after application.

Always work in a ventilated area and wear personal protection. Do not apply in direct sunlight. Always apply on a cool surface.

After use, always close the bottle with the screw cap immediately, do not leave the sprayer attached!

Downloads